Wearing materials
Lateral guide rubber (rubber)
Black lateral guide rubber
- FTK-REX60 Black lateral guide rubber
- Density 1.23
- ±60–65° Shore
- * Without adhesive layer in various sizes, e.g. 10 mm thick, 80–200 mm wide
- For guiding the material on the conveyor belt
Red lateral guide rubber
- FTK-REX40 Red lateral guide rubber
- Density 1.20
- ±40–45° Shore
- Without adhesive layer in various sizes, e.g. 10 mm thick, 80–200 mm wide
- For guiding the material on the conveyor belt
Rubber plates
Black rubber plates
- Abrasion-resistant wear rubber < 130 mm³
- Black, Shore hardness ±60–65°
- Tear resistance 15 N/mm2
- Tear elongation 490%
- Density 1.14
- 10,000 mm x 2,000 mm long
- 3–30 mm thick
- With or without contact layer
Red rubber plates
- Abrasion-resistant wear rubber < 110 mm³
- Red, Shore hardness ±40–65°
- Tear resistance 20 N/mm2
- Tear elongation 650%
- Density 1.12
- 10,000 mm x 2,000 mm long
- 3–25 mm thick
- With or without contact layer
Areas of application: Lining chutes and transfer points, sealing, etc.
Friction linings
Friction linings on the drive drum are used on almost all conveyor belts to ensure that the drive force is applied to the belt via friction and prevent the drive pulley slipping. A good friction lining prevents the belt from slipping and therefore reduces wear. We offer various friction linings, including rubber, ceramic, rubber/ceramic and rubber/corundum
Other wearing materials
- PU plates
- Rubber drum linings
- Ceramic drum linings
- PE plates/pipes
