Dust sealing stations
![Staubabdichtungsstation](https://foerderbandtechnik.eu/wp-content/uploads/2021/09/IMG_2054-1024x575.jpg)
- Effective dust seal in the infeed area
- Low wastage
- Buffers the material falling onto the belt conveyor
- Lower cleaning costs
- Longer conveyor belt service life
- Greater occupational safety
- Simple assembly, no welding required
- Adapters exchanged for existing carrying rollers
- Approx. dimensions of the impact bars: 1240 L x 100 W x 75 H
- Approx. dimensions of the impact bars: 1240 L x 100 W x 55 H
- Impact bars can be fitted using the bolts provided
- Optimal alignment of the skirting rubber on the conveyor belt
These are the measurements we require for the adapters:
- Roller diameter in mm
- Roller casing length in mm
- Axle length in mm
- Width across flats in mm
![Prallbalken mit Adapterstück](https://foerderbandtechnik.eu/wp-content/uploads/2021/10/Prallbalken-mit-Adapterstueck-1024x576.jpg)
Impact bars and bolts
Impact bars consist of three components connected to one another by hot vulcanisation:
- A special rubber mix with a shore hardness of 62° A for absorbing the drop energy
- A high-slide UHMWPE coating and 10 mm thick
- A vulcanised aluminium profile for easy bar installation
Special-purpose M16x40 bolts, also available as M12.
![Silberner Adapterstück für Prallbalken](https://foerderbandtechnik.eu/wp-content/uploads/2021/09/csm_IMG_4218_fbbea13192.jpg)
Adapters
We manufacture adapters to your exact specifications to replace carrying rollers in the task.
We require these measurements:
- Roller diameter in mm
- Roller casing length in mm
- Axle length in mm
- Width across flats in mm