Carrying rollers instead of drive rollers & drums
![Rote Tragrolle](https://foerderbandtechnik.eu/wp-content/uploads/2021/09/csm_Rot_vorne_2_70e2487abc.jpg)
Steel carrying rollers
- Strict limits and longitudinally welded carrying roller tubes made of S235JR steel in accordance with DIN 2458
- Deep-drawn steel bearing retainers with calibrated bearing seats pressed in from the side and circularly welded, material thickness minimum s = 2.00 mm
- RAL 3,000 m red powder-coated sheath, coating thickness min. 60 U
- 20 mm Ø round steel in accordance with ISO h9
- Single-row radial steel ball bearings in accordance with DIN625 type 6204 with suitable grease filling and cover plates on both sides made of sheet steel – C3 bearing clearance
- Steel circlip in accordance with DIN 471
- Sealed using double labyrinth seal, including suitable grease filling, galvanised, sheet-steel sealing cap and plastic rain cap
- Belt speed 2 m/sec.
- Delivery capacity 200 t/h
- Bulk weight 0.75 t/m³
- Temperature range 0–50°C
![Blaue Tragrollen](https://foerderbandtechnik.eu/wp-content/uploads/2021/09/csm_009_669111f1e5.jpg)
Plastic (HDPE) carrying rollers
- HDPE plastic carrying rollers from
- Less noise
- Lighter than steel rollers (by approx. 50%)
- Weather resistant
- Higher impact resistance
- Gentle on the conveyor belt
- Prevents dirt from sticking
- Long service life
- Anti-static properties
- Flame retardant or self-extinguishing
![Rote Seitenführungsrolle](https://foerderbandtechnik.eu/wp-content/uploads/2021/10/Seitenfuehrungsrolle-scaled-e1634727661280-1024x768.jpg)
Lateral guide rollers
![Umlenktrommeln](https://foerderbandtechnik.eu/wp-content/uploads/2021/09/csm_DSC04779_584b469e4b.jpg)
Tail pulleys
We manufacture tail pulleys, disc wheels, beating drums and throbbing drums with or without internally located cone for your special conveyor systems. With a max. diameter of 1,000 mm and a max. length of 4,500 mm, they are suitable for all types of conveyor systems. All pulleys turn cylindrically or spherically. The axle connections can be delivered in alternative designs: with internal bearings, welded, with wedged connections or with clamping set shaft connections.
Special designs, such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be supplied upon request.
![Umlenktrommeln](https://foerderbandtechnik.eu/wp-content/uploads/2021/09/csm_DSC04779_584b469e4b.jpg)
Drive pulleys
We manufacture drive pulleys, disc wheels, beating drums and throbbing drums with or without internally located cone for your special conveyor systems. With a max. diameter of 1,000 mm and a max. length of 4,500 mm, they are suitable for all types of conveyor systems. All pulleys turn cylindrically or spherically. The axle connections can be delivered in alternative designs: with internal bearings, welded, with wedged connections or with clamping set shaft connections.
Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be supplied upon request.