Carrying rollers instead of drive rollers & drums
Steel carrying rollers
- Strict limits and longitudinally welded carrying roller tubes made of S235JR steel in accordance with DIN 2458
- Deep-drawn steel bearing retainers with calibrated bearing seats pressed in from the side and circularly welded, material thickness minimum s = 2.00 mm
- RAL 3,000 m red powder-coated sheath, coating thickness min. 60 U
- 20 mm Ø round steel in accordance with ISO h9
- Single-row radial steel ball bearings in accordance with DIN625 type 6204 with suitable grease filling and cover plates on both sides made of sheet steel – C3 bearing clearance
- Steel circlip in accordance with DIN 471
- Sealed using double labyrinth seal, including suitable grease filling, galvanised, sheet-steel sealing cap and plastic rain cap
- Belt speed 2 m/sec.
- Delivery capacity 200 t/h
- Bulk weight 0.75 t/m³
- Temperature range 0–50°C
Plastic (HDPE) carrying rollers
- HDPE plastic carrying rollers from
- Less noise
- Lighter than steel rollers (by approx. 50%)
- Weather resistant
- Higher impact resistance
- Gentle on the conveyor belt
- Prevents dirt from sticking
- Long service life
- Anti-static properties
- Flame retardant or self-extinguishing
Lateral guide rollers
Tail pulleys
We manufacture tail pulleys, disc wheels, beating drums and throbbing drums with or without internally located cone for your special conveyor systems. With a max. diameter of 1,000 mm and a max. length of 4,500 mm, they are suitable for all types of conveyor systems. All pulleys turn cylindrically or spherically. The axle connections can be delivered in alternative designs: with internal bearings, welded, with wedged connections or with clamping set shaft connections.
Special designs, such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be supplied upon request.
Drive pulleys
We manufacture drive pulleys, disc wheels, beating drums and throbbing drums with or without internally located cone for your special conveyor systems. With a max. diameter of 1,000 mm and a max. length of 4,500 mm, they are suitable for all types of conveyor systems. All pulleys turn cylindrically or spherically. The axle connections can be delivered in alternative designs: with internal bearings, welded, with wedged connections or with clamping set shaft connections.
Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be supplied upon request.
